2016 John Deere 1200a Bunker Rake Manual
A timeless design, a tireless workhorse. The 1200A has been delighting golf course superintendents and sports field managers for a long time running. It’s easy to see why.
Start with a similar job-proven drivetrain found in our popular Gator™ T-Series. The engine runs at an easy 3,100 rpm. This, along with a solid muffler and cowling design, significantly reduces machine noise. Not only is the 1200A efficiently designed, it’s also high in ergnomics. An adjustable high-back seat, standard power lift of the rear rake, counterbalanced front- and mid-mounted implements and an external-fill fuel tank.
The operator station for the 1200A Bunker and Field Rake was designed with comfort and productivity in mind. A large 14-in. (35.6-cm) diameter steering wheel with 8.3-to-1 gear reduction ratio provides for easy and responsive steering. An adjustable high back seat with spring cushion reduces operator fatigue. Wide running boards offer comfortable leg support across a wide range of operators. All controls for cultivating and front blade operation are conveniently located to the operator's right hand side.
John Deere 1200 A Parts
The mechanical linkage design allows for easy operation of both attachments. An electrical lift/lower system for the rear-mounted attachments means effortless lifting and lowering. The switch is located on the dash for the ultimate in ease of use. The foot control design of the 1200A increases productivity with ease of operation. To change from forward to reverse, a convenient pedal system is located on the left side of the foot platform, allowing for quick and easy engagement with the touch of a toe. To select the forward gear, simply press the front pedal forward. To switch to reverse, press the rear foot pedal rearward. Neutral position is required for starting, and can easily be located by utilizing the bar welded to the foot platform.
2015 bmw 745i manual pdf. To get started, you are right to find our website which has a comprehensive collection of manuals listed.
The brake engagement is located on the right side of the foot platform. A foot-activated transaxle disc brake allows for quick and controlled stops. To activate the parking brake, simply step on the brake pedal and engage the retaining lever. To de-activate the parking brake, simply disengage the retaining lever by pushing forward with the right foot or toe. Also located to the right side of the operator platform is the throttle pedal. To move the 1200A, simply select the direction of travel on the left hand side, disengage the parking brake, and press on the throttle pedal. The further the pedal is pushed, the faster you will go. The maximum speed is 12.6 mph (20.3 km/h). NOTE: Revving the engine or failing to brake to a complete stop prior to changing from forward to reverse and vice versa will result in gear clash and may damage the machine.
How To Start John Deere 1200 A Bunker Rake
The torque converter and transaxle design delivers a 164-to-1 gear ratio for excellent pulling and pushing power. The belt from torque converter is permanently engaged, greatly reducing the potential of belt wear. A durable Kanzaki® transaxle with a differential lock allows for increased traction and reliability. The rear differential design allows for the 1200A to turn on a tight 12-in. (305-mm) turning radius for outstanding maneuverability, yielding high productivity. Speeds are variable in forward and reverse from 0 mph to 12.6 mph (0 km/h to 20.3 km/h), providing excellent raking quality at reduced ground speeds without sacrificing quick transport from bunker to bunker.
Kanzaki is a U.S.-registered trademark of Kanzaki Kokyukoki Manufacturing Company. Raising the hinged rear fiberglass cowling exposes the air-cooled, four-cycle, overhead valve engine. This engine features a powerful 401-cc-cc single-cylinder design, which generates 13.5 hp (10.1 kW).
High torque for pulling power. Fuel efficient for lower operating cost and extended operating range.
3.6-U.S. (13.6 L) fuel tank for long hours of operation with leaded or unleaded gasoline. Full-pressure lubrication and oil filter for good reliability. Low vibration for long component life and operator comfort.At 3600 rpm.
Engine manufacturer gross power tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less. Refer to the engine manufacturer’s website for additional information. All instrumentation and operator controls are located on the front dash for ease of use and premium visibility. These include:. Hour meter to keep track of service intervals. Voltage indicator to monitor for proper charging of the 12-V power circuit.
Ignition switch on right hand side of the console for quick and easy starting. Easy-to-reach optional front light switch, mounted on the left side. Choke control on left hand side of console for easier cold starts. Easy access to the rear implement lift and lower switch, located on the right side of the dash. Manufacturer Type 4-cycle, air cooled Displacement 401 cc Horsepower At 3600 rpm: 13.5 hp Engine manufacturer gross power tested in accordance with SAE J1995. The engine hp and torque information are provided by the engine manufacturer for comparison purposes only. Actual operating hp and torque will be less.
Craigslist John Deere 1200 A
Refer to the engine manufacturer?s website for additional information. Compression ratio 8:4:1 Lubrication Full-pressure Oil capacity 1.3 L 1.4 U.S. Qt Oil filter Standard Spark arrester muffler Standard Idle speed Low speed: 1,175 (+/- 75) rpm fast speed: 3,100 (+/- 75) rpm. Rake Width 1981 mm 78 in.Weight 20 kg 44 lbBlades Five-section, bunker or fieldProng rake Three section, 24 prongs, adjustment: 25-76 mm 1-3 in. Rear mount, powerlift control Cultivator Width 1626 mm 64 in.Weight 20 kg 44 lb 10 blades, hand control w/ 5-position depth adjustment Front blade Width 1016 mm 40 in.Height 152 mm 6 in.Weight 21 kg 46 lb Optional, hand control with lock-up position 60-in.
Aluminum front blade Width 1524 mm 60 in.Height 263 mm 10.25 in.Weight 3.7 kg 8 lb Articulating front-mount core-removal blade Width 1231 mm 48 in.Height 237 mm 9.25 in.Weight 10.9 kg 24 lb Optional, hand control with lock-up position Wide- and narrow-interval scarifier tines attachment Width Wide - 1606 mm 63.25 in. Narrow: 1574.8 mm 62Tines Wide - 20 tines, length: 89 mm 3.5 in.
Narrow - 35 tines, length: 89 mm 3.5 Mid-mount 64.5-in. (164.9 mm) scraper blade attachment Width 1649 mm 64.5 in.Height 144 mm 5.625 in.Weight 9.5 kg 21 lb Rear-mounted 60-in. Field finisher Width 1538 mm 60 in.Length 355.6 mm 14 in.Weight 19.5 kg 45 lb Hydraulic pump package Couplers Two female, comply with ANSI ASAE S418 standardActivation SwitchWeight 5.2 kg 11.5 lb.
Comments are closed.